Lasko Universal Remote 3440 User Manual download pdf (Page 2)

Rev. K 8/10

2084182

Rev. K 8/10

2084182

MODELO 3440

FUNCIONAMIENTO

Este Ventilador podrá hacerse funcionar mediante los

controles manuales ubicados en la parte superior de la

unidad (como se indica en la Figura 1) o con el Control Remoto

(como se indica en la Figura 2).

1. Cuidadosamente retire el Ventilador de la caja.

2. Coloque el ventilador sobre una superﬁcie ﬁrme y nivelada.

Asegúrese que el enchufe encaje ﬁrmemente en el

tomacorriente.

Cuando los enchufes quedan flojos en los

tomacorrientes, pueden deslizarse parcial o

completamente fuera del tomacorriente con un leve

movimiento del cable adosado. Los tomacorrientes

en este estado podrían sobrecalentarse y representar

un grave peligro de incendio; si está cubierto por una

cortina o tela, el riesgo de incendio es aún mayor.

Botón de

Temporizador

Botón de

Encendido

3. Conecte el cable eléctrico a un tomacorriente de 120 voltios.

4. Para ajustar la direccion del aire, simplemente jire la cabeza

del ventilador.

5. La cremallera con un adjuste de mantendra el ventilador en la

posicion deseada.

Nota: El ensamble de la cremallera en el Wind Tunnel Remote esta

disenada para que trabe en cada posicion. Asi que cuando ajuste

el angulo del ventilador oira un sonido lo cual es normal.

6. Conecte la energía eléctrica a su ventilador pulsando el Botón

Encendido ( ) en el Ventilador.

7. VELOCIDAD DEL VENTILADOR: Ahora puede ajustar la ve-

locidad del ventilador al nivel deseado - 3 (alta), 2 (mediana) ó

1 (baja) - pulsando el Botón Velocidad del Ventilador ( ) en

el Ventilador. (Figura 1)

8. FUNCIÓN DE TEMPORIZADOR: Este ventilador está equipado

con un temporizador que le permite a usted establecer la du-

ración de la operación oprimiendo el Botón de Temporizador

( ) manualmente en el área de control del ventilador, o presio-

nando el Botón Temporizador ( ) en el control remoto. Pulse

la tecla una vez para uno hora de funcionamiento, dos veces

para dos horas y tres veces para cuatro horas. Si se pulsa por

cuarta vez, el ventilador vuelve al modo de funcionamiento

continuo.

9. Después de apagar el Ventilador, desconecte la unidad del

tomacorriente eléctrico.

Figura 2

Si usted pierde su mando a distancia, por favor Cliente de llamada

Serive para ordenar un reaplacement en 1-800 -233-0268, de lunes

a viernes, entre las 8:00 a.m. y las 5:00 p.m. (Horario Estándar del

Este de los Estados Unidos).

3. Todas las funciones realizadas con el Control Remoto

pueden realizarse de igual forma con los Controles

Manuales.

4. No mezcle baterías viejas y nuevas. No mezcle baterías

alcalinas, estándar (carbono-cinc) o recargables (níquel-

cadmio).

5. No se deshága de baterías en el fuego. baterías pueden estallar

o pueden salirse.

Figura 1

Botón Velocidad

del Ventilador

Botón Encendido

Botón de

Temporizador

MODEL 5132

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions should always be followed to reduce

the risk of ﬁre, electrical shock and injury to persons, including the following:

SAVE THESE INSTRUCTIONS

Read all instructions before using this Fan.

1. Make certain the power source conforms to the electrical requirements of the Fan.

2. Make certain that the room is equipped with a working smoke detector.

3. Use this Fan only as described in this manual. Any other use not recommended by the manufacturer may cause ﬁre, electrical shock,

or injury to persons.

4. To reduce the risk of personal injury and electric shock, the Fan should not be played with or placed where small children can reach it.

5. Unplug power cord before installing, servicing, or moving the Fan.

DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING

OR MOVING THE FAN. ALWAYS UNPLUG THE POWER CORD. ALWAYS TURN OFF AND UNPLUG FAN BEFORE

LEAVING THE AREA. NEVER LEAVE CHILDREN UNATTENDED WHEN THE FAN IS ON OR PLUGGED IN.

6. This Fan must NOT be used in potentially dangerous locations such as ﬂammable, explosive, chemical-laden or wet atmospheres

where gasoline, paint or ﬂammable liquids are used or stored.

7. DO NOT use Fan in or near a window. Rain may create an electrical hazard.

8. Completely assemble Fan, according to instructions, before connecting to power supply.

REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK - DO NOT USE THIS FAN

WITH ANY SOLID STATE SPEED CONTROL DEVICES.

9. Where possible, avoid the use of extension cords because the extension cord may overheat and cause a ﬁre. If you must use an exten-

sion cord, minimize the risk of overheating by using the shortest cord possible and ensuring that it is UL listed. NEVER use a single

extension cord to operate more than one Fan. Do not plug Fan into any other cord connected device, such as a power strip, cord

reel, surge protector, multiple outlet adapters or outlet-type air fresheners. The use of such devices may create a ﬁre hazard.

10. NEVER operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any manner.

There are no user serviceable parts.

11. NEVER insert or allow ﬁngers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or ﬁre,

or damage the Fan. To reduce the risk of ﬁre, DO NOT block or tamper with the Fan in any manner while it is in operation.

12. Always place the Fan on a stable, ﬂat, level surface when operating, to avoid the chance of the Fan overturning. Locate the Power

Cord so the Fan or other objects are not resting on it.

13. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture

or appliances. Arrange cord away from trafﬁc area and where it will not be tripped over.

14. This Fan is not intended for use in wet or damp locations. NEVER locate a Fan where it may fall into a bathtub or other water con-

tainer. NEVER use Fan where ﬂammable liquids are used or stored.

15. NEVER use Fan outdoors.

16. Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Fan. If this occurs,

move the Fan to another location.

17. Keep Fan remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Fan.

18. This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are conﬁned. Please

refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical require-

ments for Agricultural Buildings. THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).

19. This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or

local codes or standards relating to electrical requirements for Hazardous locations. THIS FAN DOES NOT MEET THE REQUIRE-

MENTS OF NEC ARTICLE 500 (2008).

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock,

this plug is intended to ﬁt in a polarized outlet only one way. Match wide blade of plug to wide slot. Fully

insert. If the plug does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed

electrician. DO NOT attempt to defeat this safety feature.

This plug is a safety feature. It contains a safety device (fuse) that should not be removed. Discard product

if the attachment plug is damaged. To reduce the risk of ﬁre, electric shock and personal injury, DO NOT

remove, replace, repair or tamper with the originally supplied plug. If the Fan does not function properly,

it may be due to the safety device incorporated in this plug. Call 800-233-0268, Monday - Friday, between

8:00 a.m. and 5:00 p.m. Eastern. If the plug warning label is missing or damaged, call the toll free number

for a replacement label.

Botón

Velocidad del

Ventilador

PARA MONTAR EN LA PARED:

ESTE VENTILADOR se DEBE MONTAR EN UNA SUPERFICIE PLANA

ESTRUCTURALMENTE SOLIDA.

Sólo uso #6-32 X 1" tornillos para montar este Ventilador. La

longitud del tornillo debe ser lo suﬁcientemente larga para ajustarse

al clavo pared. Si un clavo no puede ser montado ni si el Ventilador

se monta en una pared utilice unas anclas mas covenientes para

este tipo de montaje.

Al montar el Ventilador a la pared, el cable de conexión se debe

colocar por fuera del cuerpo del Ventilador.

(Figura 3)

CONTROL REMOTO (Figura 2)

1. Instale la baterías (no suministró) como mostrado en la Figura

2. La batería es el tipo “AAA”.

2. El Botón De Encendido del Control Remoto está identiﬁcado

como ( ).

Yunta De

Ventilador

Figura 3

Conjunto

De Cuerdo

1 2 3 4

Comments to this Manuals

No comments

Lasko Universal Remote 3440 User Manual Page 2

Comments to this Manuals

Related products and manuals for Household fans Lasko Universal Remote 3440